SHNs were decoded to wave and Audition 2.0 was used to reassemble
the tracks back to 1 long wave. Audition 2.0 was used to align &
synch the SBD & AUD sources.
- Aud and sbd were synced while working on a dts encoded cd, matrix and audio dvd
- FLAC conversion 11-MAY-2007
Audio Patching:
1) Before Promised Land, 1 minute and 16.000 seconds were missing from the sbd source and filled in with audio from the Steve Hopkins audience. This portion of the audio was normalized to blend in better.
2) During Lazy Lightning, 24.865 seconds were missing from the sbd source and filled in with audio from the Steve Hopkins audience. This portion of the audio was normalized to blend in better.
3) Between Supplication and Row Jimmy, 42.861 seconds were missing from the Jerry Moore audience source and filled in with audio from the Steve Hopkins audience. This portion of the audio was normalized to blend in better.
4) During Might As Well, 28.054 seconds were missing from the sbd source and filled in with audio from the Steve Hopkins audience. This portion of the audio was normalized to blend in better.
5) During Let It Grow, 26.345 seconds were missing from the sbd source and filled in with audio from the Steve Hopkins audience. This portion of the audio was normalized to blend in better.
6) Between Let It Grow and Friend Of The Devil, 54.113 seconds were missing from the Jerry Moore audience source and filled in with audio from the Steve Hopkins audience. This portion of the audio was normalized to blend in better.
---------------------------------------------------------
DTS-Audio-CD Info
Front
Left Channel SBD
Right Channel SBD
Center
Mixed to mono -1.5db SBD
Surround
Left Channel -0db AUD
Right Channel -0db AUD
Sub/LFE
Mixed to mono -1.5db SBD Reel
--------------------------------------------------------------
More On DTS
Today's audio standards are moving towards multi-channel
sound, like DTS and Dolby Digital. While the Audio-CD
standard (Red Book) hasn't changed to accommodate these
new sound formats, it is still possible to go around the
specification and to put a 5.1 surround recording on a
regular Audio-CD. To play a DTS-Audio-CD you must connect
your DVD/CD player via a digital cable (optical or coaxial)
to your DTS Dolby-Digital receiver. It is not 100% sure
that your receiver will recognize a DTS-Audio CD, so the
first time you're trying to playback a DTS-Audio-CD you
must do a test to determine if it can. Begin with the
volume very low, start the disc and raise the volume
gradually. NEVER listen to a DTS-Audio-CD through the
analog audio outputs of your CD/DVD player.
Burning Instructions
Burn them the absolute same way as you would burn any
normal Audio-CD from FLAC files.