*first Loose Lucy since 10/19/74 - crowd goes nuts in the background
Audio Source Information
SBD (shnid=8466)
sbd>mc>dats>Soundforge 4.5>CDWAV>SHN
d1 tape flip b/t Loose Lucy & Memphis Blues
d2t6-4:31 tape flip
d2t1-Crazy Fingers- 5:14 tiny blip
d2t2-Playin- 4:24-4:26 static
i am 99.420% sure ' Let It Grow' from this show appears on Without A Net - Chris L.
Seed SHN's provided by Tom E.
SBE's fixed and hosted by Chris L. at candyman.etree.org, 3/2002.
AUD (shnid=89689)
Master: JVC Single Tube Camera, Nak 300 Shotguns -> 0 Decks -> Panasonic AG-7400 -> S-VHS Master
Transfer: S-VHS Master -> Sony SLV-R5UC -> Panasonic AG-7400 -> S-VHS 1st Gen
Transfer: S-VHS 1st Gen -> Panasonic AG-7150 -> Canopus ADVC-100 -> iMac G4 -> Final Cut Pro 3 -> MP2 -> Brokedown House -> AIFF -> Adobe Audition 3.0
---------------------------------------------------------
Tech Notes
SHNs were decoded to wave and Audition 3.0 was used to reassemble the tracks back to 1 long wave. Audition 3.0 was used to align & synch the SBD & AUD sources. Audition 3.0 used to adjust the volume for AUDs, matrix/CTR and LFE channels. Surcode CD Pro DTS was used to encode to DTS.
- Mixed by kevtobin@yahoo.com
- FLAC conversion 31-JAN-2008
---------------------------------------------------------
AudioVideo Patches:
None
---------------------------------------------------------------------------
DTS-Audio-CD Info
Front
Left Channel SBD -0db
Right Channel SBD -0db
Center
Mixed to mono -2db SBD
Surround
Left Channel -2db AUD
Right Channel -2db AUD
Sub/LFE
Mixed to mono -2db SBD
--------------------------------------------------------------
More On DTS
Today's audio standards are moving towards multi-channel
sound, like DTS and Dolby Digital. While the Audio-CD
standard (Red Book) hasn't changed to accommodate these
new sound formats, it is still possible to go around the
specification and to put a 5.1 surround recording on a
regular Audio-CD. To play a DTS-Audio-CD you must connect
your DVD/CD player via a digital cable (optical or coaxial)
to your DTS Dolby-Digital receiver. It is not 100% sure
that your receiver will recognize a DTS-Audio CD, so the
first time you're trying to playback a DTS-Audio-CD you
must do a test to determine if it can. Begin with the
volume very low, start the disc and raise the volume
gradually. NEVER listen to a DTS-Audio-CD through the
analog audio outputs of your CD/DVD player.
Burning Instructions
Burn them the absolute same way as you would burn any
normal Audio-CD from FLAC files.
Brokedown House Production