---------------------------------------------------------
Source Info
SBD
SBD > DAT > C > DAT > CD > EAC > FLAC
EAC/FLAC by Darryl Hinko (flyerfanatic)
Any questions contact me at: flyerfanatic2817@yahoo.com
EAC in secure mode with proper offsets used to extract
SHNtool to join and confirm sector boundries
CDwav used to split tracks
Cool Edit Pro used for all editing
FLAC frontend for encoding to FLAC
Notes:
- d1t01 Touch of Grey: First 30 seconds crossfaded at 5000 ms.
Static through 2:10. This was also on the AUD
- d2 and d3 are not seemless. The cut occurs on the other SBD and
the AUD was missing more.
AUD1
AUD (unknown mics) >DAT>Cass (X1)>CDR (HHB CDR-850).
Comments: Drums > Space (d2>d3) transition is discontinuous.
CDR source via D.Duquette. DAE/SHN encoding via neo_levo/candyman FTP.
TMNSP - 4/03.
AUD2
Video soundtrack from low generation vhs
---------------------------------------------------------
Tech Notes
SHNs were decoded to wave and Audition 1.0 was used to reassemble
the tracks back to 1 long wave. Audition 1.0 was used to align &
synch the SBD & both AUD sources. Audition 1.0 used to adjust the
volume for both AUDs, matrix/CTR and LFE channels. Surcode
CD Pro DTS was used to encode to DTS.
- Aud and sbd were synced while working on a low generation video
available on 3 dvds by Brokedown House Productions
- Mixed by kevtobin@yahoo.com
- FLAC conversion 09-APR-2005
---------------------------------------------------------
DTS-Audio-CD Info
Front
Left Channel SBD
Right Channel SBD
Center
Mixed to mono -3db SBD
Surround
Left Channel -2db AUD (with some AUD2 patches)
Right Channel -2db AUD1 (with some AUD2 patches)
Sub/LFE
Mixed to mono -3db SBD Reel
---------------------------------------------------------
Notes
1) end of drums - 4 minutes of Aud1 and 1 min of Sbd are
filled in using Aud2
2) beginning of space - 19 sec of sbd and 42 sec of Aud1
are filled in using Aud2
3) before encore - 12 sec of sbd and aud1 are filled in
using Aud2
---------------------------------------------------------
More On DTS
Today's audio standards are moving towards multi-channel
sound, like DTS and Dolby Digital. While the Audio-CD
standard (Red Book) hasn't changed to accommodate these
new sound formats, it is still possible to go around the
specification and to put a 5.1 surround recording on a
regular Audio-CD. To play a DTS-Audio-CD you must connect
your DVD/CD player via a digital cable (optical or coaxial)
to your DTS Dolby-Digital receiver. It is not 100% sure
that your receiver will recognize a DTS-Audio CD, so the
first time you're trying to playback a DTS-Audio-CD you
must do a test to determine if it can. Begin with the
volume very low, start the disc and raise the volume
gradually. NEVER listen to a DTS-Audio-CD through the
analog audio outputs of your CD/DVD player.
Burning Instructions
Burn them the absolute same way as you would burn any
normal Audio-CD from FLAC files.
---------------------------------------------------------