Tech Notes
SHNs were decoded to wave and Audition 1.0 was used to reassemble
the tracks back to 1 long wave. Audition 1.0 was used to align &
synch the SBD & both AUD sources. Audition 1.0 used to adjust the
volume for the AUD, matrix/CTR and LFE channels. Surcode
CD Pro DTS was used to encode to DTS.
- Mixed by kevtobin@yahoo.com
- FLAC conversion 01-AUG-2006
---------------------------------------------------------
DTS-Audio-CD Info
Front
Left Channel SBD
Right Channel SBD
Center
Mixed to mono -2.5db SBD
Surround
Left Channel -2.5db AUD
Right Channel -2.5db AUD
Sub/LFE
Mixed to mono -2.5db SBD
---------------------------------------------------------
Audio Patching:
1) At the beginning of the show, 35.331 seconds were missing from the sbd source and filled in with audio from the audience. This portion of the audio was normalized to blend in better.
2) Between Cold Rain & Snow and Big River, 34.204 seconds was missing from the aud source and filled in with audio from selected audience crowd noise. This portion of the audio was normalized to blend in better.
3) Between Big River and Friend of the Devil, 10.700 seconds was
missing
from the aud source and filled in with audio from selected audience
crowd
noise. This portion of the audio was normalized to blend in better.
4) Between Friend of the Devil and Cassidy, 10.700 seconds was missing
from
the aud source and filled in with audio from selected audience crowd
noise.
This portion of the audio was normalized to blend in better.
5) Between Cassidy and Must Have Been the Roses, 25.225 seconds was
missing
from the aud source and filled in with audio from selected audience
crowd
noise. This portion of the audio was normalized to blend in better.
6) Between Looks Like Rain and Scarlet Begonias, 20.814 seconds was
missing
from the aud source and filled in with audio from selected audience
crowd
noise. This portion of the audio was normalized to blend in better.
---------------------------------------------------------
More On DTS
Today's audio standards are moving towards multi-channel
sound, like DTS and Dolby Digital. While the Audio-CD
standard (Red Book) hasn't changed to accommodate these
new sound formats, it is still possible to go around the
specification and to put a 5.1 surround recording on a
regular Audio-CD. To play a DTS-Audio-CD you must connect
your DVD/CD player via a digital cable (optical or coaxial)
to your DTS Dolby-Digital receiver. It is not 100% sure
that your receiver will recognize a DTS-Audio CD, so the
first time you're trying to playback a DTS-Audio-CD you
must do a test to determine if it can. Begin with the
volume very low, start the disc and raise the volume
gradually. NEVER listen to a DTS-Audio-CD through the
analog audio outputs of your CD/DVD player.
Burning Instructions
Burn them the absolute same way as you would burn any
normal Audio-CD from FLAC files.