---------------------------------------------------------
Source Info
SBD
Taper: ?
Source: SBD > MC > DAT
Location: At the soundboard
AUD
Taper: Dave Brotman
Source: FOB > Schoeps CMC54 (ORTF) > Aerco PS > DAT
Location: 19th Row
---------------------------------------------------------
Tech Notes
SHNs were decoded to wave and SF 6.0 was used to reassemble
the tracks back to 1 long wave. CEP2.0 was used to align &
synch the SBD & AUD sources. This is a 60% SBD, 40% AUD mix.
- Mixed by dan@am-dig.com
- Shn conversion done by dan@am-dig.com 10-AUG-2004
- Artwork by Mike Ahern and dan@am-dig.com 300dpi - For best
results print at the highest resolution onto glossy photo
paper. Design for use with a clear slim double jewel case.
Special thanks to Mike for his hard work on this art.
---------------------------------------------------------
Notes
The levels were very low on the SBD source. I increased
set 1 by 3.5db and set 2 by 7.5db.
D1t4 'BIODTL' a 1 second AUD patch was made at approx 2.22
to cover a cut, dropout or skip in the SBD. Source change
from SBD to AUD is obvious to the listener.
D1t5 'Roses' a 1 second AUD patch was made at approx 0.22
to cover a cut, dropout or skip in the SBD. The result was
smooth and most likely unnoticeable.
D1 The SBD source was missing approx 2.38 of crowd cheer
after 'Roses'. Most likely where the cassette flip was.
The AUD source was trimmed to match. The result was smooth
and most likely unnoticeable.
D2 and D3 can be assembled seamlessly on longer media.
NOTE: Burning options. You can also burn this as 2 CDs by
putting D2T1 & D2T2 (Scarlet > Fire) on the end of the first
CD. Obviously I set this up for 3 discs but in the end I
ended up burning as a 2 disc myself. The artwork was setup
to accomidate both options.
D2 Both the SBD and the AUD sources had breaks bwtn the D2
and D3 change. The SBD source also had a cassette flip break.
Fortunately the breaks were at different spots. I patched
the missing SBD portions, approx 4 and 3 seconds, with the
AUD. I patched the missing AUD portion, approx 6 seconds, with
the SBD. The result was smooth and most likely unnoticeable.
The SBD source faded out after the last song of set 2. It
restarts at the very first notes of the encore. I adjusted
the AUD source accordingly to match. I tried to make this
as smooth as possible and it came out okay.
I ran the center channel lower than usual (-5db) for this
DTS 5.1 mix.
This Scarlet > Fire is absolutely insane.
Final/last "Believe It Or Not" 10-21-1988 (89 shows)
Final/last "Hey Jude" 03-01-1969 (1522 shows)