Tech Notes
SHNs were decoded to wave and SF 6.0 was used to reassemble
the tracks back to 1 long wave. CEP2.0 was used to align &
synch the SBD & the AUD sources. CEP2.0 used to adjust the
volume for the SBD, FOB, CTR and LFE channels. Surcode CD
Pro DTS was used to encode to DTS. -3db was NOT applied
to the rear channels. Both of the sources for the front
and rear channels were left at their original levels.
- Mixed by dan@am-dig.com
- Shn conversion done 14-MAR-2004
- Artwork by dan@am-dig.com 300dpi - For best results
print at the highest resolution onto glossy photo paper.
Design for use with a clear slim double jewel case.
---------------------------------------------------------
DTS-Audio-CD Info
Front
Left Channel SBD
Right Channel SBD
Center
Mixed to mono -3db SBD
Surround
Left channel B&K 4011
Right channel B&K 4011
Sub/LFE
Mixed to mono -3db SBD
---------------------------------------------------------
Notes
D1t06 Interference from a walkie-talkie can be heard, which
is very strange.
The SBD source was missing between song cheers on several songs
in the first set. No music was missing. In a few spots a patch
with the AUD source was used to maintain a smooth flowing sound.
Disc 2 and 3 can be seamlessly reassembled.
If you play this DTS-Audio-CD and hear static it is b/c you
didn't really read the text file, did you?
---------------------------------------------------------
More On DTS
Today's audio standards are moving towards multi-channel
sound, like DTS and Dolby Digital. While the Audio-CD
standard (Red Book) hasn't changed to accommodate these
new sound formats, it is still possible to go around the
specification and to put a 5.1 surround recording on a
regular Audio-CD. To play a DTS-Audio-CD you must connect
your DVD/CD player via a digital cable (optical or coaxial)
to your DTS Dolby-Digital receiver. It is not 100% sure
that your receiver will recognize a DTS-Audio CD, so the
first time you're trying to playback a DTS-Audio-CD you
must do a test to determine if it can. Begin with the
volume very low, start the disc and raise the volume
gradually. NEVER listen to a DTS-Audio-CD through the
analog audio outputs of your CD/DVD player.
Burning Instructions
Burn them the absolute same way as you would burn any
normal Audio-CD from FLAC files.