---------------------------------------------------------
Tech Notes
SHNs were decoded to wave and Audition 2.0 was used to reassemble the tracks back to 1 long wave. Audition 2.0 was used to align & synch the SBD & both AUD sources. Audition 2.0 used to adjust the volume for AUDs, matrix/CTR and LFE channels. Surcode CD Pro DTS was used to encode to DTS.
- Mixed by kevtobin@yahoo.com
- FLAC conversion 27-OCT-2007
---------------------------------------------------------
Audio Faults:
1) Between So Many Roads and The Music Never Stopped, 06.821 seconds were missing from the soundboard source and was filled in with audio from the AUD3 audience source. This portion of the audio was normalized to blend in better.
2) About 4 minutes into Fire On The Mountain, 26 minutes and 46.643 seconds were missing from the AUD1 audience source and filled in with audio from the AUD2 audience source. This portion of the audio was normalized to blend in better.
3) Between Fire On The Mountain and Long Way to go Home, 1 minute and 05.798 seconds were missing from the soundboard source and was filled in with audio from the AUD3 audience source. This portion of the audio was normalized to blend in better.
4) During Drums, 05.865 seconds were missing from the soundboard source and was filled in with audio from the AUD3 audience source. This portion of the audio was normalized to blend in better.
5) During Space, 06.743 seconds were missing from the soundboard source and was filled in with audio from the AUD3 audience source. This portion of the audio was normalized to blend in better.
6) The encore on the GEM (AUD1) had a speed problem being almost 6% slow (almost 3 seconds every minute). As no video existed for this segment, I compared to similar encore from 5/31/92 and used that as a basis to correct the speed of the GEM.
The video and the GEM recording provided the timing referenece being almost exactly alike whereas the Healy sbd was slightly fast (aprox 1% or .5 seconds every 2 minutes). The first set was synced to the GEM and the 2nd set was synced to the video except the encore that was missing.
---------------------------------------------------------------------------
DTS-Audio-CD Info
Front
Left Channel SBD -0db
Right Channel SBD -0db
Center
Mixed to mono -2db SBD
Surround
Left Channel -2db AUD
Right Channel -2db AUD
Sub/LFE
Mixed to mono -2db SBD
--------------------------------------------------------------
More On DTS
Today's audio standards are moving towards multi-channel
sound, like DTS and Dolby Digital. While the Audio-CD
standard (Red Book) hasn't changed to accommodate these
new sound formats, it is still possible to go around the
specification and to put a 5.1 surround recording on a
regular Audio-CD. To play a DTS-Audio-CD you must connect
your DVD/CD player via a digital cable (optical or coaxial)
to your DTS Dolby-Digital receiver. It is not 100% sure
that your receiver will recognize a DTS-Audio CD, so the
first time you're trying to playback a DTS-Audio-CD you
must do a test to determine if it can. Begin with the
volume very low, start the disc and raise the volume
gradually. NEVER listen to a DTS-Audio-CD through the
analog audio outputs of your CD/DVD player.
Burning Instructions
Burn them the absolute same way as you would burn any
normal Audio-CD from FLAC files.
Brokedown House Productions